FR230 is used to stop the spread of fire and smoke around services that pass through compartment walls and floors, whilst providing a load bearing capability (refer to application instructions). The system also provides thermal, acoustic and air sealing performance.

FR230 is suitable for the following service penetrations: single and bunched cables, cable trays/ladders/ baskets, non-combustible pipes. Also suitable for cable trunking, combustible pipes, insulated non-combustible pipes, in conjunction with a suitable Nullifire closer device (for example FP302 Intustrap or FP160 Intusleeve).

May also be used around dampers & ventilation ducts (consult manufacturer).

Typical areas of use include health and leisure facilities, schools, universities, hotels, commercial, retail and industrial buildings.


Benefits

• Up to 4 hours fire resistance - Tested to EN 1366-3 & 4
• 1.21 m² without framework requirement
• Load and impact capability after 50 hours only
• Flows easily around and behind services
• Rapid setting, zero shrinkage formulation
• Can be used as pourable or trowel grade
• Acoustic and thermal performance

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.