• Proven performance in numerous internationally recognised tests
• Suitable for both 30 and 60 minute fire resistant doors
• Standard colours – white, brown, dark brown, black and slate grey
• Non-standard colours available on request
• Standard length – 2100mm. Non-standard lengths up to 3m available on request

Technical

Pyrostrip 500PSS Brush Smoke can be supplied in the following sizes, colours and finishes.

Standard Sizes:

Widths: 10mm, 15mm, 20mm, 25mm, 30mm, 38mm, 48mm

Depths: 4mm, 5mm, 6mm

Non-standard sizes can be manufactured to order, please contact our Sales Office.

Standard Lengths:

2100mm.

Non Standard Lengths:

Non standard lengths up to 3m can be produced. Please contact our Sales Office.

Standard Colours:

White, Brown, Dark Brown, Black and Slate Grey.

Non Standard Colours:

A wide range of non standard colours can be produced. Please contact our Sales Office.

Smoke Seals:

Available as a black brush pile with pile depths of either 5mm, 7mm or 10mm.

Data Sheet
Product Data Sheet

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.