Protecta FR Putty Cord is an easy to apply, fire rated putty supplied as a non-setting cord. Fitting the putty cords will reinstate the fire rating of the partition and prevent the passage of smoke and flames in a fire and sound and air movement during service life.
FR Putty Cord is designed to be easily fitted around cable and non-combustible pipe penetrations where the gap is very small, or there is no gap at all, so a conventional fire rated sealant is impossible or difficult to fit due to the required depth and backing material. FR Putty Cords are fitted covering the gap around the services and does not need to fill the gap to the required depth.
Protecta FR Putty Cord is an easy to apply fire rated putty supplied as a non-setting cord. The cord is hand workable, re-usable and re-serviceable due to its non-setting properties, they are supplied in circular strips and are easy to fit with your thumbs; no tools required.
Fitting the putty cords will reinstate the fire rating of the partition and prevent the passage of smoke and flames in a fire and sound and air movement during service life.
FR Putty Cord is designed to be easily fitted around cable and non-combustible pipe penetrations where the gap around the services is very small, or there is no gap at all, so a conventional fire rated sealant is impossible or difficult to fit due to the required depth and backing material. FR Putty Cords are fitted to cover the gap around the services and does not need to fill the gap to the required depth.
Key Features
Makes it possible to fire seal without any minimum annular width around services.
Installation is very simple and quick; fitted in a minute.
Gives cable and non-combustible pipe penetrations a high fire resistance in dry lining partitions and masonry or concrete walls.
Stops penetration of both cold and hot smoke.
Self-adhesive and very easy to apply without tools.
Unaffected by moisture; can be used in wet rooms.
Never hardens and ensures a tight fit.
Can be reshaped to other sizes if necessary.
Provides excellent sound insulation.
Environment- and user friendly; contains no solvents or VOC’s.
Contains a low pressure intumescent for optimal fire protection.
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
Brand:
Protecta
weight:
1000.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
Protecta FR Acrylic Mas..
Designed to prevent the spread of fire and smoke through joints and openings in fire rated walls and floors (including openings formed around building service penetrations); Protecta FR Acrylic will also...
Protecta FR Graphite is a water based fire classified sealing compound that contains a high concentration of heat expanding graphite material. This compound may be used in more extreme transits than FR...
Box of 20 units, Protecta FR Putty Pad has been designed to maintain the fire resistance of gypsum walls where these are breached by electrical switches and sockets, and tap water wall boxes. The Putty...
Protecta Pipe Wrap consists of a 25m long x 50mm wide roll graphite based swelling material that reacts with heat that fills the cavities resulting from the melting plastic through-penetration in case...